Larry...The hammerer-er, well in this case the drillerer-er

Larry is the team's primary mechanic.  Today he is mounting the PiBorg UltraBorg Sensor Controller to it's permanent location inside the chassis.  We use the Ultraborg to power and read out ultrasonic sensors which we use for the 2 autonomous events (Straightline Speed Test and Minimal Maze) Larry's favorite tool is the hammer, and he likes beautiful sunsets and long walks on the beach.

Note:  The Blue tails out the back end of the robot are the connecting leads for the Line Following Sensors which we are replacing on 3/24/2017.